Header

Products


ACCESSORIES
 

Base Modem

HP CAM

In order to use the JPG cammera, it needs to be done through the CP60G model, specially configured to process the cammera information. This cammera has infrared leds that allows to take the JPG picture even through there is no natural light in the vehicle.
Requests are done from the monitoring software, and there is two sizes from de picture:
160*180 pixels or 320*240 pixels. The information is sent through GPRS in TCP protocol.

HP-CAM (IR):

In order to use the JPG cammera, it needs to be done through the CP60G model, specially configured to process the cammera information. This cammera has infrared leds that allows to take the JPG picture even though there is no natural light in the vehicle.
Request are done from the monitoring software, and there is two sizes from the picture:
160*128 pixels or 320*240 pixels. The information is sents through GPRS in TCP protocol.
This particular model also includes an IR LED, providing you the capability to watch in darkness.

GPS Antena

Car Reader::

In order to use this accessory, it needs to be done through the CP60G model, specially configured to process the reader information. The reader must be connected to the CP60G model, the driver needs to pass the card (with bar code or his name on it), and that information is sents to the central to be processed in the vehicle data information. This way it can identify, control the schedules and drivers responsible for the vehicle.
The information is sent through GPRS.

GMS Antenna

Passenger Counter:

In order to use this accesssory, it needs to be done through the CP60G model, specially configured to processs the counter information. Each counter has two bars, wich count and differentiate passanger who goes up the bus or get down. Bars needs to be installed horizontally at the BUS entrance, faced, at one meter high from the bus floor.
If the bus has more than one door, a small central can be used, wich is an accesory to be able to interact between the CP60G-Counter model and the two conunters (two bars per door). The information is sent through GPRS.

Configuration cable

Shock Sensor:

It needs to be connected to a digital input wich trigger through positive.

Engine Block Reley:

It needs to be connected to the digital input indicated to perform the engine remote block.

Vox Module

Panic Button:

It si Switch that allows to send a pulse wich alerts as PANIC at the central station.

Engine Kill Relay

A-B Interface:

It needs to be connected to the two digital inputs with less power.
The A-B interface has two relays to control, for example the vehicle doors block and unblock.

Panic Button

Backup Battery:

External lithium battery, with 4 hours autonomy. It exist a version with 9 hours autonomy.
Volt: 12v Lithium - Polymer Battery 300 mA/h. Weight: 50grs.
Dimensions: 60*37*10 mm.

Back-Up Battery

VOX MODULE:

It is an optional accessory for the CP60G model. It has a speaker and microphone for voice communication with the vehicle occupants. Only with the microphone the client has a silence remote hearing.

Passenger Counter

Base Modem:

Quad badn GSM/GPRS modem. It is used for recieving the vehicle unit reports, as to send events in SMS to the client configured cellphones in the software.

Software CD'S

Fuel Sensor:

Optional accessory for the CP-60G device. With no articulate pieces, it is adjustable to the depth of the tank. Its parts are covered by mayor protection.
Variable depth values: 180, 250, 350, 400, 500, 600, 700, 1000, 1400, 2000 mm.